Furbaby On Board Dog Owner Car Window Decal Sticker
Furbaby on Board Car Decal Sticker
Alert drivers and pedestrians to your pup's presence while driving or parking.
Car decal sticker is made from vinyl
Car sticker size: 6" x 6"
Decals stick to most surfaces, just peel and stick!
Decorate your car, van, truck, boat, walls, refrigerator and just about anything with a smooth surface.
Come in 3 layers, top layer is the transparent film, middle layer is the actual decal sticker, bottom layer is the white wax paper backing
Long lasting with a 5+ year durability expectancy for indoor and outdoor use.
Clean and dry the application surface with rubbing alcohol or soapy water. Decal stickers will apply best to clean and smooth surfaces.
Prep the decal sticker by flattening a credit card or similar object across the transparent film to press out air bubbles, bended areas and to make sure the transparent film is adhered to the sticker.
Remove the white wax paper backing from the bottom of the sticker slowly. Make sure the sticker stays adhered to the transparent film. If the sticker clings to the white paper backing, repeat step 2 until the sticker peels away without issue.
Carefully position the decal sticker to the application area.
Rub decal sticker from one side to another eliminating any air bubbles.
Use a credit card or similar object to make sure the entire area is fully adhered to the application surface.
Slowly remove the transparent film from an angle. Make sure no part of the decal sticker remains on the transparent film. If the sticker clings to the film, repeat step 5 until the sticker peels away without issue.
Check for air bubbles, which can be pressed out to the edge of the decal sticker. If an air bubble persists, use a pin to pierce the air bubble and then press out the remaining air. The pin hole will be virtually invisible.
Ta-da! Enjoy your new Car decal sticker!
Do not wash freshly applied decal sticker for 24 hours
Do not apply to extreme hot or cold surfaces. Ideal outdoor temperature for application is 50 F - 90 F
Do not touch adhesive backing, oils from your hands will diminish sticking performance
Before applying decal, make sure there is no wax or oily products on the surface